build a cat tree with real tree

Building cat tree will save a lot for yourself, and with fun project. but , even building little and simple cat tree will take a lot efforts: cutting the wood, connect the post with base , cover the perch ,etc. and as we know, the key of cat tree is the stability,Especially for particularly lively cats, they like to jump up and down. Now , building cat tower with real tree maybe solve the problem. And it will be much more simple and easy ,just only find a great tree.
Select the Crown section Branch weight above 20CM, branch shape position a more reasonable trees.



The winter is the best time to cut the tree, The trees relatively dry during the winter months. Remain after tree felling need parts, bark peeled off.





Shave, steel ruler, exposing the plain wooden parts, and pruning as designed, high and low are evenly distributed.





As the need for additional branches, before it can be used to remove branches, wire rod into Center grafted at both ends. Fully dry before Assembly.





12CM large screw and base plate fixed at the bottom, the way you can tie some rope.





Plate, adjust the levels, I used the toothless saw blade grinding of flat surfaces.





Begin to assemble plates, as the way of fix the floor base. drill a hole, into the screw.




fix the holes with screw.
cover the perch and base, I used the mat fabric, durable, slightly larger than the Board trim, surrounded with foam nails (large nails) fixed





All done you can rope all wrapped up. (Special note, before the Board on the best well position, align all panels on each side in order to placed against the wall)





Now , there is your real cat tree ! enjoy !

Amazon buying list of making cat tree:

Share this post